Welcome
About Us
Services
Solutions
equipment
Contact
 



Thompson EnviroprimeĀ® trash pumps are engineered to provide consistent and dependable service on the most difficult job sites. These pumps are used in a wide variety of applications including open pumping and sewage bypassing where moderate air handling is required. The pumps are capable of pumping liquids with high abrasives or solids as large as 3.35" in diameter. EnviroprimeĀ® trash pumps are specifically designed to prevent pumping fluid, such as sewage, from entering the venturi and eventually onto the ground making the EnviroprimeĀ® environmentally friendly and safe.

Construction: Dewatering excavations, canals and sumps; bypassing sewers and bodies of water; groundwater dewatering; water supply from wells or canals; hosing down concrete casings; extended sumping; wellpoint dewatering
 
Civil Engineering: Sewage pumping; flood drainage; fire fighting; recovery of hazardous liquids
 
Waste Treatment: Sewer bypasses; pumping polluted hot or corrosive wastewater containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge
 
Mining: Wash-down operations; tailings; high head/high volume applications
 
Agricultural: Surface irrigation; liquid manure oxygenation; transfer and spraying fertilizers or manure
 
Industrial: Transfer of neutral, acid or alkali clean or dirty liquids containing sand, mud or solids in suspension; low viscosity petroleum products
 
Note: Alternate pump end materials available for corrosive liquids
 
 
 All the features of Thompson's TS Series Heavy Duty Trash Pumps and more...
 
 Alternate self-priming and wet priming capability
 
 Automatic dry priming and re-priming to 30 feet
 
 Environmentally safe
 
 Able to operate during 'snore' conditions
 
 Positive suction head capability
 
 Heavy duty cast iron construction for long life
 
 Large solid handling capacity
 
 High flow and high head capabilities
 
 2 or 3-vane ductile iron impellers available
 
 Impeller inspection cover allows easy access for cleaning and repair without disturbing suction piping
 
 Cast iron rubber-lined, abrasion-resistant wear plate
 
 Dry running abrasion-resistant tungsten carbide mechanical seal with Viton elastomers
 
 Safety shutdown control panel standard
 
 Various diesel engine and electric motor options
 
 Simple low-cost maintenance
 



Click for Press Release









Copyright MacAllister Machinery Co., Inc. All Rights Reserved.
Unauthorized use of images and content is strictly prohibited.
For our current catalog: Click Here
For more information please contact us