Welcome
About Us
Services
Solutions
equipment
Contact
 



Trash pumps are engineered to provide consistent and dependable service on the most difficult job sites. These pumps are used in a wide variety of applications including open pumping and sewage bypassing where moderate air handling is required. The pumps are capable of pumping liquids with high abrasives or solids as large as 3.35" in diameter. Trash pumps are specifically designed to prevent pumping fluid, such as sewage, from entering the venturi and eventually onto the ground making the environment friendly and safe.

Construction: Dewatering excavations, canals and sumps; bypassing sewers and bodies of water; groundwater dewatering; water supply from wells or canals; hosing down concrete casings; extended sumping; wellpoint dewatering
 
Civil Engineering: Sewage pumping; flood drainage; fire fighting; recovery of hazardous liquids
 
Waste Treatment: Sewer bypasses; pumping polluted hot or corrosive wastewater containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge
 
Mining: Wash-down operations; tailings; high head/high volume applications
 
Agricultural: Surface irrigation; liquid manure oxygenation; transfer and spraying fertilizers or manure
 
Industrial: Transfer of neutral, acid or alkali clean or dirty liquids containing sand, mud or solids in suspension; low viscosity petroleum products
 
Note: Alternate pump end materials available for corrosive liquids
 
 
 Heavy duty cast iron construction for long life
 
 All the features of Thompson's HT Series Heavy Duty Trash Pumps and more...  
 Alternate self-priming and wet priming capability  
 Automatic dry priming and re-priming to 30 feet  
 Environmentally safe  
 Able to operate during 'snore' conditions  
 Positive suction head capability  
 Heavy duty cast iron construction for long life  
 Large solid handling capacity  
 2 or 3-vane ductile iron impellers available  
 Cast iron rubber-lined, abrasion-resistant wear plate  
 Dry running abrasion-resistant tungsten carbide mechanical seal with Viton elastomers  
 Safety shutdown control panel standard  
 Various diesel engine and electric motor options  
 Simple low-cost maintenance  



Click for Press Release









Copyright MacAllister Machinery Co., Inc. All Rights Reserved.
Unauthorized use of images and content is strictly prohibited.
For our current catalog: Click Here
For more information please contact us